Home
About Us
Contact Us
Help
Site Map
View Cart1962-63 Pontiac Tempest Convertible Top and Convertible Top Parts
Cleaning & Protectant | Important Information
Fabrics:
The original convertible top fabric was pinpoint vinyl. We offer the top in modern Haartz pinpoint vinyl. We also offer these tops in Haartz Stayfast canvas. You can read all about fabrics at the "Help" link at the top of this page.
Classic Two Part Tops:
You can read how these tops install by clicking on the blue link at the bottom of this page. There is sufficient information there to enable a decision on do-it-yourself installation. About half of our classic two part top customers perform their own installation using one of our manuals.
Installation requires no sewing; stapling (with stainless steel staples) and contact cement work are required. If you are comfortable renting and using an air driven staple gun then you should be a candidate for do-it-yourself installation.
The full, detailed, and well illustrated, 1962-63 Pontiac Tempest/Lemans manual is included with our top package specials.
Main Top and Rear Curtain:
The two parts of the top (which integrate during installation) are available separately.
Hold Down Cables:
Cables are threaded through the side hems (cable pockets) of the top. They fasten the top, front and back, on each side, to the frame. They are not visible in the completed installation.
Tack Strips:
Tacking strips are embedded in the header bow and the rear top bow. They receive the installation staples or tacks. Tack strips should last through at least two tops.
Pads:
The padding can last through two tops. The pads are attached under the top and build it out.
Boots:
If you desire a storage boot we strongly recommend using one of the modern boot vinyls. These have a slight "give" or stretch which makes them ideal as boots. Topping vinyls will be stiff and unwieldy.
Hydraulics:
We now stock hydraulic cylinders, motor-pumps, and hoses for your convertible tops. All are made to OEM specifications. Each can be ordered separately; however, when ordering hydraulic cylinders we recommend replacing both. The chances are that both hydraulic cylinders were manufactured at the same time: if one is on its way out the other may follow. If the top is raised and one hydraulic cylinder is working harder than the other the result over time can lead to a slightly bent convertible top frame. The replacement of both hydraulic cylinders will ensure that the top raises and lowers symmetrically.
Systems for this car take Automatic Transmission Fluid (ATF) and have a 5 year warranty when used with this fluid. Brake fluid should not be used as it voids the warranty. We also offer an installation manual when ordered.
The 12 volt motor-pumps include a mounting bracket with rubber grommets to reduce vibration.
We also offer a rebuilding service for motor-pumps. Not all are repairable, but it is less expensive to have one rebuilt than to buy a new one. The motor-pump would need to be sent to us for evaluation. Hoses come with all new fittings and are made specifically to fit your car.
Parts in this category (Pontiac Tempest) fit cars for years: 1962 and 1963.
We a now pleased to offer hydraulic cylinders, hydraulic motor pumps, and hydraulic hose sets. Also, checkout our newly added roof rail weatherstripping seals, front header weatherstripping seals, door weatherstripping seals, trunk weatherstripping seals. Look for extra savings on weatherstripping seals kits.
