1960-61 Plymouth Fury Convertible Top and Convertible Top Parts
Important Information
Two Part Top:
This is a classic two part convertible top. The main top and the rear window section are integrated during installation. You can read all about how this is done at the link at the bottom of this page to a summary of our installation manual.
If you feel comfortable using an air driven staple gun and with aligning and gluing with contact cement then do-it-yourself installation should be within your capabilities. There is no sewing involved.
Fabrics:
These tops are available in either Haartz Pinpoint vinyl or Haartz Stayfast canvas. The latter is the longer wearing and features an elegant canvas outer layer. The vinyl, less expensive, is easier to keep clean. The pinpoint vinyl is the original fabric.
Tack strips:
Tack strips are embedded in the front and rear top bows and receive the tacks or staples that fasten the top. Tack strips usually last through two tops. Replacement strips are available. See "accessories" for replacement tacking strips.
Pads:
Pads install under the top, along the sides from the front to the rear. They "build out" the top. Pads usually last through two tops. They are also available here, at "accessories."
Package Specials:
The package contains all that is usually required for a thorough top restoration job.
Hydraulics:
We now stock hydraulic cylinders, motor-pumps, and hoses for your convertible tops. All are made to OEM specifications. Each can be ordered separately; however, when ordering hydraulic cylinders we recommend replacing both. The chances are that both hydraulic cylinders were manufactured at the same time: if one is on its way out the other may follow. If the top is raised and one hydraulic cylinder is working harder than the other the result over time can lead to a slightly bent convertible top frame. The replacement of both hydraulic cylinders will ensure that the top raises and lowers symmetrically.
Systems for this car take Automatic Transmission Fluid (ATF) and have a 5 year warranty when used with this fluid. Brake fluid should not be used as it voids the warranty. We also offer an installation manual when ordered.
The 12 volt motor-pumps include a mounting bracket with rubber grommets to reduce vibration.
We also offer a rebuilding service for motor-pumps. Not all are repairable, but it is less expensive to have one rebuilt than to buy a new one. The motor-pump would need to be sent to us for evaluation. Hoses come with all new fittings and are made specifically to fit your car.
Presently we do not have a boot for this convertible.
If you can provide an old boot for use as a pattern we will have one made
for you at no cost. Also we do not have information on the side
hold down cables. If there are cables in your top we will reproduce from yours at no charge.
Parts in this category (Plymouth Fury) fit cars for years: 1960 and 1961.
We a now pleased to offer hydraulic cylinders, hydraulic motor pumps, and hydraulic hose sets. Also, checkout our newly added roof rail weatherstripping seals, front header weatherstripping seals, door weatherstripping seals, trunk weatherstripping seals. Look for extra savings on weatherstripping seals kits.

Home
About Us
Contact Us
Help
Site Map