Home
About Us
Contact Us
Help
Site Map
View Cart1982-83 Dodge 400 Convertible Top and Convertible Top Parts
Important Information
Fabrics:
The original Dodge 400 tops were in pinpoint vinyl. We also offer these tops in Haartz Stayfast canvas. You can read more details about topping fabrics at the "HELP" link at the top of this page.
We also offer the top made in Chrysler Sailcloth vinyl. This is structurally identical to the pinpoint vinyl, but the surface vinyl was designed to emulate canvas. This is the original fabric on modern Sebring and many Mustang tops.
Windows:
The rear window is a zippered plastic one, as original.
Pads:
Wrapped foam pad sections are applied under the top to 'build out' the top. We can supply the pad sets.
Tack Strips:
Tack strips are embedded in the front (header) frame bow and in the rear top bow (the one over the rear window.) They receive staples that hold the top to the frame along these bows.
Hold Down Cables:
A pair of cables hold the sides of the top to the frame. Cables are embedded in the top's cable hems during installation and are hidden after installation. New cables are recommended with each top.
Installation:
This is a classic two part top. The 'main top' and the 'curtain' are integrated during the installation process. The procedure can be seen via the blue link below to our booklet on installing classic two part tops.
If you are comfortable renting and using an air driven staple gun then you are a likely candidate for do-it-yourself installation. This involves stapling and gluing. There is no sewing.
Boots:
A convertible top stowage boot is optional. We strongly recommend boots made of modern boot vinyl. These have a slight "give" and a broad array of color choices. Boots made in this fabric are much easier to use than boots made of topping fabric. Usually a boot is chosen in a color to coordinate with the paint and/or interior.
Hydraulics:
We now stock hydraulic cylinders, motor-pumps, and hoses for your convertible tops. All are made to OEM specifications. Each can be ordered separately; however, when ordering hydraulic cylinders we recommend replacing both. The chances are that both hydraulic cylinders were manufactured at the same time: if one is on its way out the other may follow. If the top is raised and one hydraulic cylinder is working harder than the other the result over time can lead to a slightly bent convertible top frame. The replacement of both hydraulic cylinders will ensure that the top raises and lowers symmetrically.
Systems for this car take Automatic Transmission Fluid (ATF) and have a 5 year warranty when used with this fluid. Brake fluid should not be used as it voids the warranty. We also offer an installation manual when ordered.
The 12 volt motor-pumps include a mounting bracket with rubber grommets to reduce vibration.
We also offer a rebuilding service for motor-pumps. Not all are repairable, but it is less expensive to have one rebuilt than to buy a new one. The motor-pump would need to be sent to us for evaluation. Hoses come with all new fittings and are made specifically to fit your car.
Parts in this category (Dodge 400) fit cars for years: 1982 and 1983.
We a now pleased to offer hydraulic cylinders, hydraulic motor pumps, and hydraulic hose sets. Also, checkout our newly added roof rail weatherstripping seals, front header weatherstripping seals, door weatherstripping seals, trunk weatherstripping seals. Look for extra savings on weatherstripping seals kits.
