Home
About Us
Contact Us
Help
Site Map
View Cart1967 Dodge Polara & Monaco Convertible Top and Convertible Top Parts
Important Information
The Dodge Polara and the Dodge Monaco convertibles of 1967 take identical convertible tops and top parts. We are pleased to offer replacement tops made from original patterns. Our factory has been collecting dealer original tops since the mid thirties.
Fabrics: Original convertible top fabric in these Polara and Monaco convertibles was pinpoint grain vinyl. We offer these tops with the zippered rear plastic window and also with a zippered glass rear window. We can make these tops without trim fabric or with trim fabric below the rear window. Please specify your preference in the checkout message box.
Classic Two Part Tops: You can read how these tops install below. There you will see a link to a summary of our two part top installation booklet. There is sufficient information there to enable a decision on do-it-yourself installation. The full, detailed manual is included with our top packages or you may purchase it separately (see "accessories" below.) Installation requires no sewing; only stapling (or tacking) and contact cement work.
Main Top and Rear Curtain: The two parts of the top (which integrate during installation) are available separately.
Hold Down Cables: A cable is threaded through the side hem of the top on each side. The cables are fastened to the top frame in the front and in the rear. We recommend changing cables with each new top.
Tack Strips: Tacking strips are embedded in the header bow and the rear top bow. They receive the installation staples or tacks. Tack strips should last through at least two tops.
Pads: The padding can last through a second top. If you are doing a restoration job yourself we recommend the pad purchase. If you are going to a top shop for a labor estimate you can supply just the top and cables as the shop will have ready access to all standard pads.
Hydraulics:
We now stock hydraulic cylinders, motor-pumps, and hoses for your convertible tops. All are made to OEM specifications. Each can be ordered separately; however, when ordering hydraulic cylinders we recommend replacing both. The chances are that both hydraulic cylinders were manufactured at the same time: if one is on its way out the other may follow. If the top is raised and one hydraulic cylinder is working harder than the other the result over time can lead to a slightly bent convertible top frame. The replacement of both hydraulic cylinders will ensure that the top raises and lowers symmetrically.
Systems for this car take Automatic Transmission Fluid (ATF) and have a 5 year warranty when used with this fluid. Brake fluid should not be used as it voids the warranty. We also offer an installation manual when ordered.
The 12 volt motor-pumps include a mounting bracket with rubber grommets to reduce vibration.
We also offer a rebuilding service for motor-pumps. Not all are repairable, but it is less expensive to have one rebuilt than to buy a new one. The motor-pump would need to be sent to us for evaluation. Hoses come with all new fittings and are made specifically to fit your car.
We a now pleased to offer hydraulic cylinders, hydraulic motor pumps, and hydraulic hose sets. Also, checkout our newly added roof rail weatherstripping seals, front header weatherstripping seals, door weatherstripping seals, trunk weatherstripping seals. Look for extra savings on weatherstripping seals kits.
